WG and WF Series Double Tube Core Barrels
WG and WF series double tube core barrels are sturdily designed for coring soft to medium rocks using water, polymer or mud flush. The WF series utilize core bits with face discharge flushing ports to prevent core erosion in soft soils and soft rocks. The WG series utilize core bits with internal discharge flushing and are designed for slightly harder formations.
These core barrels are intended for use in conjunction with DCDMA drill rods and casing.
- Simple sturdy design
- Can be used when DCDMA hole sizes N, H, P and S are required.
|Specification||Core Barrel Type|
|Hole Diameter (mm)||75.6||99.2||120.6||146.3|
|Core Diameter (mm)||54.7||76.2||92.1||112.8|
|Kerf / Crown Thickness (mm)||10.3||11.35||13.95||16.3|
|Cutting Area (cm2)||21.5||31.7||47.7||68.1|
|Hole Area (cm2)||45.0||77.3||114.3||168.1|
|Cutting Area as % of Hole Area||48%||41%||42%||41%|
|Core Area (cm2)||23.5||45.6||66.6||100.0|
|Thread Connection in Head*||NW||
2 7/8 API IF
|2 7/8 API IF|
|Conversion to triple tube possible||No||Yes||Yes||Yes|
*Cross-over sub required for drill rods not matching the thread connection in core barrel head
Key to Main Parts of WG and WF Core Barrel Assembly
Complete core barrel consists of:
1. Core Barrel Head
2. Inner Tube 1.5m or 3.0m long
3. Outer Tube 1.5m or 3.0m long
4. Ferrule / Inner Tube Extension Piece (only required for WF series)
5. Core Lifter
6. Core lifter Case (not required for WG series)
Core Bit is not supplied as part of the core barrel assembly, but must be chosen correctly to match the particular application and rock formation. Blank Reaming Shell is supplied with WG Series Core Barrels but TC or Diamond type may be required for some formations. Please refer to our Core Bits page for further details.